August 17, 2021

Can I Use A Coffee Grinder To Grind Herbs? | Pros and Cons

How do you grind your herbs? Do you use your hands, a knife, or some sort of manual grinder? Whichever method you may use, the task can get quite tiresome, especially when you are someone who consumes herbs on a daily basis.

Fret not, because we have come across an effortless solution to your problem, which is – making use of a coffee grinder. Yes, you read that right. A regular old coffee grinder can do the trick for you. We are aware that you might have a number of questions buzzing through your head right now about this revelation, and we are here to answer all of them for you.

Why You Should Grind Herbs

Grinding certain herbs is an important step in their utilization process. Breaking down your flower into small pieces helps ensure that you get the most out of your herbs by allowing it to burn completely and evenly.

By grinding the herbs beforehand, users can also ensure that their herbs do not end up becoming too compact or clumpy, so you don’t end up wasting any herbs.

Grinding up the herb prior to consuming it is an important step for any herbs connoisseur looking to make the most out of their herbs experience.

Why Should You Use A Coffee Grinder To Grind Your Herbs?

Without a doubt, there is a wide range of electrical grinders available on the market for the purpose of grinding herbs. Then why should you opt for a coffee grinder?

Better quality

The first and foremost thing to notice is that, since electronic coffee grinders have been around for ages, the industry has had plenty of scope to enhance its products. The race for the top between different brands leads to more testing and advancements, resulting in a much better (and more durable) quality in comparison to any other daily-use grinders.

Easier to find at a lower cost.

Another advantage of using coffee grinders is that they are easily available in stores, and you won’t have to empty your pockets completely to buy one. Even the best ones come at a low cost, with prices starting as low as $20.

Saving time

The use of scissors, manual or low-quality grinders to grind herbs can be tedious and time-consuming. Now, you can save yourself from the hassle by choosing a much faster alternative that gives you the desired result within seconds – the coffee grinder.

You are in control!

The method through which people consume herbs varies, and each requires a different consistency of the substance. With a coffee grinder, you are the one in command. Not only does it give you a much more even grind, but you can also control how fine or coarse you want it to be.

Advantages and Disadvantages of Using a Coffee Grinder for Herb Grinding

Using a coffee grinder for herb grinding is a known method among herbal enthusiasts. One of the advantages of using this method is the speed at which it is done. With a quick push of a button, your herbs are ground up in seconds.

Another advantage is the uniformity of the grind. The grinding blades of the coffee grinder produce even and consistent results, which is important for an even burn.

However, there are also disadvantages to this method. One of which is the potential for cleanliness issues. Coffee grinders are not specifically designed for grinding herbs, so the device may not be adequately cleaned and could leave remnants of your previous grind behind.

This may lead to an unpleasant mixture of flavors and potential cross-contamination. Another disadvantage is the potential for the heat generated by the blades to alter the potency of the herbs.

Understanding the Impact on Herbs Potency

As the use of potent herbs continues to gain popularity, many enthusiasts are searching for ways to enhance their experience. One trend that has emerged is the use of coffee grinders to increase potency. While some people have reported success with this technique, others have expressed concerns about safety and effectiveness.

On one hand, grinding herbs can create finer particles. On the other hand, the heat and friction created by the grinder may degrade the potency of the plant.

Additionally, there is the risk of inhaling fine particles that can cause respiratory issues. As with any new technique, it's important to weigh the risks and benefits and proceed with caution.

A Guide On How To Use A Coffee Grinder For Herb And Precautions To Take

Best Coffee Grinder for Weed for Efficient Grinding | Mamba Grinders™

Now that you know why you should go for a coffee grinder to grind your herbs, you must be wondering how to make use of this invention, so we have devised a little guide for you.

The method of using a coffee grinder to grind herbs is as follows:

Make sure that you clean your grinder thoroughly first to avoid any cross-contamination of substances.

Place your herbs into the grinder.

The method of grinding herbs is similar to how you would grind coffee beans. However, instead of using your grinder at its maximum speed, you must use the pulse method. This gives you control over the consistency of the powder.

Voila! Your herbs are ready to consume. herbs ground in coffee grinders is commonly used for cooking or manufacturing oils.

However, some things that you will have to consider when using a coffee grinder to grind herbs are:

Take care not to fill up the grinder with herbs all in one go. It is recommended to pack loosely into the appliance.

Avoid using buds that are too large or minuscule in size.

Take pauses between each pulse to prevent the grinder’s motor from exhausting.

Adjust the duration of the pulse and settings of the appliance according to your requirements.

Note that your herb should not be wet or damp; otherwise, it will stick to the grinder.

Tips for Optimal Herb Grinding with a Coffee Grinder

Grinding herbs is a crucial step in the process, and using a coffee grinder can be a useful tool in achieving the perfect consistency. However, achieving optimal herbs grinding with a coffee grinder may seem daunting. Fear not, there are some tips to ensure you're grinding like a pro.

Firstly, clean the grinder properly, so you're not inhaling old coffee smells. Secondly, don't just throw the herbs in and grind it all at once – instead, use smaller amounts and pulse the grinder to ensure everything is evenly broken down.

Lastly, make sure to shake the grinder between grindings, this will ensure that all the herbs is evenly processed. By following these tips, you'll be enjoy a smooth smoke that hits just right.

Optimizing Your Grinding Experience: Expert Tips for Using a Coffee Grinder with Herbs

Grinding your herbs is a pivotal step in the preparation process, and when you choose to use a coffee grinder, there are nuances that can significantly impact the outcome. The process isn't merely about reducing the herb to smaller bits; it's about achieving the right consistency, preserving potency, and ensuring a smooth experience. Optimizing your grinding experience with a coffee grinder involves understanding the intricacies of the appliance and employing expert tips to enhance its functionality.

When using a coffee grinder for herbs, it's essential to recognize the appliance's potential to over-grind, turning your herb into an undesired powder. To avoid this, consider these expert tips:

Controlled Grinding Consistency

Coffee grinders often feature a pulsing or grinding speed adjustment. Utilize the pulse method when grinding your herbs, employing short bursts. This approach prevents over-grinding and allows you to control the consistency of the powder. Whether you prefer a coarse grind for joint rolling or a fine texture for vaping, the pulse method ensures your herbs aligns with your specific method.

Mindful Loading of the Grinder

Take care not to overload the grinder with herbs. Instead, pack your buds loosely into the grinder. Overloading can exert excessive stress on the grinder's motor and blades, potentially affecting performance. By loading the grinder mindfully, you not only ensure optimal functionality but also extend the lifespan of your coffee grinder, making it a more sustainable investment in your herb's preparation routine.

Periodic Shaking and Cleaning

Achieving an even grind and preventing residue buildup are essential aspects of optimizing your grinding experience. Shake the grinder between grindings to distribute the herbs evenly. Regular cleaning is crucial for maintaining the efficiency of the appliance. Clean the grinder thoroughly before and after each use to prevent cross-contamination and preserve the purity of your herbs . A periodic cleaning routine ensures that your coffee grinder remains a reliable tool, consistently delivering high-quality ground herbs.

These expert tips empower you to take control of your grinding experience, ensuring that your coffee grinder becomes a reliable and effective tool in enhancing the overall quality of your herb consumption. By implementing these practices, you can maximize the potential of your coffee grinder and elevate your herbs preparation process to a level of expertise that enhances the enjoyment of your herb experience.

Coffee Grinder Hacks for Enhanced Herb Grinding

As herb enthusiasts, we know that a good grinder makes all the difference in enhancing the experience. But what if we told you that your trusty coffee grinder can do more than just grind beans? That's right, with a few hacks, your coffee grinder can become the ultimate tool for grinding herb.

First, try cleaning your grinder thoroughly before use. This will prevent any leftover coffee oils from tainting the flavor. Next, consider freezing your herb before grinding it. This will make it easier to break down and will decrease the risk of losing any precious flavor and aroma.

Finally, consider using a finer grind setting for a more consistent burn and increased potency.

Avoiding Cross-Contamination in Coffee and herb Grinding

Coffee and herb grinding require great care and caution to avoid cross-contamination between the two. Without proper attention, it is possible for the grinder to pick up remnants of herb flower or resin, which could compromise the flavor and quality of your next cup of coffee. This is especially important if you are using the same grinder for both substances - which many people do. But with the right precautions, you can make sure that your coffee tastes great and your herb remains untainted.

How to Properly Clean Your Coffee Grinder for Herb Use

If you're an avid coffee-lover, you know how important it is to clean your grinder to maintain the quality of your beloved beans. But what about cleaning it for your herb use? Just like with coffee, cleaning your grinder plays a key role in maintaining the purity and potency of your herbs.

Residue build-up can not only affect the flavor of your herb, but it can also clog up your grinder and make it less efficient. So, how do you properly clean your coffee grinder for herb use? It's all about using the right tools and techniques as detailed in the operating guide or instruction manual supplied with your coffee grinder. With a few simple steps, you can ensure a clean and effective grinder for all your herb needs.

Using Coffee Grounds to Neutralize Herb Odor

If you're an herb enthusiast, you know that the unmistakable odor of herbs can be a concern, especially if you live in close quarters with others or want to keep your usage discreet. While there are various methods to minimize the smell, one unconventional yet effective option is using used coffee grounds.

Simply place coffee grounds in a bowl or jar and let them sit in the room for a few hours. Once you've disposed of them, not only will your room be free of herb odor, but it'll also smell like a fresh cup of coffee.

Creative Uses for Coffee Grounds in Herb Gardening

Coffee grounds have long been used as a natural fertilizer in gardening, but did you know they can also enhance the growth of your herb plants? By adding coffee grounds to your soil mix, you can provide valuable nutrients like nitrogen, phosphorus, and potassium to your plants. Not only that, but coffee grounds can also help regulate the pH of the soil. But the benefits don't stop there.

Coffee grounds can also help repel certain pests and even attract beneficial ones like earthworms. So, the next time you make a fresh pot of coffee, save those grounds for your herb garden and watch your plants thrive.

Related Article: Creative Ways to Repurpose Old Grinders

Beyond Grinding: Innovative Uses of Coffee Grinders in Herb Lifestyle

Coffee grinders, originally crafted for the sole purpose of grinding coffee beans, have seamlessly transitioned into indispensable tools within the herb lifestyle, transcending their initial design. While their primary function remains breaking down herb buds efficiently, these devices have proven to be versatile in various aspects of herb preparation and beyond.

In the quest for an enhanced herb experience, enthusiasts have discovered that coffee grinders offer more than just a means of achieving the perfect grind. Their functionality extends into the realms of herb storage, blend creation, and culinary exploration, providing a holistic approach to herb consumption.

Herb Storage and Preservation

Coffee grinders equipped with airtight containers serve as more than just a grinding apparatus. Once herb is ground to the desired consistency, these containers prove to be effective storage units, maintaining freshness by minimizing exposure to air and light. This dual-purpose functionality streamlines the herb preparation process, offering both convenience and preservation of the herb's integrity over time.

Creating Custom Blends

Elevating the herb experience involves experimenting with custom blends, and coffee grinders are the perfect tool for this creative endeavor. Enthusiasts can blend different herb strains to achieve a personalized mix that caters to individual tastes and desired effects. The consistent grinding capability of coffee grinders ensures an even distribution of various strains, resulting in a well-balanced blend tailored to specific occasions or moods.

Culinary Adventures with Herbs

Coffee grinders have found a place in the kitchen, facilitating the infusion of herbs into various recipes. Grinding herbs to a fine consistency enables easy incorporation into oils, butters, or other cooking bases. This opens a realm of possibilities for herb enthusiasts interested in exploring edibles or creating their own herb-infused culinary delights. The precise grinding offered by coffee grinders ensures an even distribution of cannabinoids, enhancing the effectiveness of culinary creations.

As herb culture evolves, enthusiasts continue to find innovative ways to integrate tools traditionally associated with other purposes into their herb rituals. Coffee grinders, with their versatility and consistent performance, have become more than just a device for grinding; they are now essential companions in the diverse landscape of the herb lifestyle.

What You Should Know Before Buying A Coffee Grinder For Herbs

Before you set out to buy yourself a coffee grinder for the purpose of grinding herbs, there are a few features that you must pay attention to, like-

Size

Grinders that are mainly used for grinding herbs are usually smaller than those used for coffee. Thus, it is recommended that you go for a much more compact size.

Burr or Blade?

Nowadays, there are two kinds of grinders available on the market, predominantly known as burr or blade grinders. These two vary in the number of blades they contain and the way they function. While the blade grinder has a single blade that rotates at a fast pace, burr grinders have two blades that rotate in opposite directions to each other to grind your required substance.

Both of these are quite effective for the task at hand if used in a proper manner. Nonetheless, if you want to grind herbs, it is recommended that you opt for a burr grinder as you can adjust its blades according to your liking and consequently control how finely you want your hash to be chopped.

The material of the grinder

It is essential for a grinder’s body and blades to be made of stainless steel, as any other material is not durable and may rust easily. Moreover, containers made of stainless steel are easier to clean.

Adjusting speed

To make the task of grinding herbs even more hassle-free, you can buy a grinder that has a feature to adjust its speed. However, if you do not have one with that feature, the speed can be controlled by paying attention to the amount of time taken to grind.

Container

Another thing that you must watch out for when you go out to buy a coffee grinder for this purpose is to make sure that your grinder has a container that catches the ground goods. This will surely make it easier for you to scrap your reward and enjoy it to the fullest.

Comparing Coffee Grinders for Herbs: Blade vs. Burr

Burr or Blade?

Reasons Why We Do Not Recommend Using A Coffee Grinder

Although using a coffee grinder to grind herbs has many benefits, there are some downsides to it as well.

First off, cleaning the grinder after using it can become quite a burden, but it is a significant procedure to follow for safe consumption. The grinder must be cleaned thoroughly before and after each use to avoid any cross-contamination, and many times, it is difficult to extract the residual herbs particles from the blades.

Secondly, your grinder can suffer wear and tear if you pack it with too much herbs . Grinding your herbs using a coffee grinder can get a tad bit irritating and noisy. Plus, excessive grinding of the herbs may result in it turning into complete dust, which renders the product useless.

There's also these factors to do with taste and consistency:

Residual Coffee Smell and Taste: Another downside is that when you use a coffee grinder for grinding herbs, there is always going to be some residual smell and taste of coffee leftover in the herbs after grinding, which may not be desired by some smokers.
Lack Of Control Over Grind Size: With a coffee grinder, you are not able to adjust the consistency of your grind size as with other methods such as hand grinding or using a specialized herb grinder. It tends to produce an inconsistent grind size which can make it difficult for a smoker to get even burning from their herbs.

In summary, although a coffee grinder can be used to grind herb flower, it is not recommended due to the numerous disadvantages listed above. If you are looking for the best way to grind your herbs, we would suggest using a specialized herb grinder so that you can achieve the desired consistency while still preserving the potency of your herbs.

What Can I Use Other Than A Coffee Grinder?

If you feel like a coffee grinder is not suitable for you, there is a wide range of tools and appliances you can use to fulfill your purpose of breaking down the herbs. Below are some tips which you can make use of:

Scissors

You can chop your herbs into a chunky consistency using this tool.

Pepper grinder

Just empty and wash out your pepper grinder and make sure that your herbs are dry, or it might slow down the process by clogging the grinder.

Chopping board and knife

For this purpose, you can use any knife as long as it has a sharp blade. However, a non-serrated knife (also known as the "chef’s knife") is highly recommended. Just grab a cutting board, and dice away until you have reached a grounded consistency. Watch out for your hand and do not get too handsy with it. Otherwise, you risk turning the herbs into a complete powder.

Pestle and Mortar

Although this method can be a little time-consuming, it is quite effective for the task at hand. However, note that you don’t grind your herbs with too much force, or it might destroy its essence.

Use your hands!

Perhaps the easiest way to grind herbs is just to make use of your hands. This will give you the real sensory feel of what it is like to be a stoner.

Cheese grater

Another fun way to play with your herbs is to use a cheese grater. Make sure you have a plate underneath and watch your fingers while you grate so that you do not end up injuring yourself.

Blender

Just like you would use a grinder to break down your herbs, you can make use of a blender too. Plus, this method is of the greatest use if you have a larger stash of herbs lying around.

Hammer and paper bag

This method is only useful when you have cured and dried the herbs, as wet herbs will not break up by the force of a hammer. Pour your herbs into the bag and fold it up. Next, place your bag on a non-brittle surface and hit it with a hammer. Once done, pour out the contents of your bag and enjoy the treat you have been waiting for.

Glass and scissors

For a mess-free encounter, use this procedure. Grab a glass and place your herbs in it – it can be either wet or dry. Next, snip away the buds until there are small enough pieces left, according to your preference.

Coin and pill bottle

This one sounds strange at first, but it works wonders. Take a clean pill bottle and place the buds in it. Next, drop a coin into the bottle and screw the lid closed. Now, shake the bottle for a minute or two and then open it to check whether the herbs is of the desired size. If not, shake it again. (Note: You can use any plastic bottle with a lid. The use of a pill bottle is not necessary.)

Here is a full article on creative ways to grind your herbs without a grinder

Electric Herb Grinders

Electric herb grinders are similar to coffee grinders but are specifically designed for grinding herbs. One advantage they have over coffee grinders is that they grind herb buds with more consistency while also unlocking hidden tastes, aroma and potency, which is the most important thing for every herb grinders.

We recommend you go for the mamba electric herb grinder. For starters, it costs almost the same price as coffee grinders if not cheaper.

Grind and dispense your most-reached-for herbs faster than ever. With an all aluminum metal head and razor sharp teeth, its simple one-handed use means no-fuss herb preparation. No matter how dense or leafy, simply mill and dispense with no contamination, spillages or wastage of expensive product.

Lightweight, portable and fast. Its clear pouring spout allows for controlled dispensing, and includes accessories for herb containment without voids or spaces and easy grinder head cleaning.

In addition, without the usual strain or cramp, its easy-to-use Rocker Switch ensures a jam-free motion and therapeutic benefits for infirm hands with limited joint mobility and strength

If you have 30- 40 bucks to spend on a grinder, instead of going for a make-shift solution, why don't you get something dedicated for your herb?

Related Article: 10 Best Electric Herb Grinders in 2023

More Alternative Methods to Grinding Herbs Without a Grinder

While coffee grinders undoubtedly provide a convenient and consistent method for grinding herbs, there are circumstances where access to a dedicated grinder is limited. In such instances, exploring alternative methods becomes essential for herb enthusiasts who don't want to compromise on the quality of their experience. Whether you're on the go, facing grinder malfunctions, or simply prefer manual techniques, this comprehensive guide will walk you through alternative methods of grinding herbs without a grinder.

Utility Knife / Box Cutters as Precision Tools

When you find yourself in a bind, a utility knife can serve as efficient precision tools for grinding herbs. To ensure optimal hygiene and results, it's crucial to use sharp and sanitized blades. If it's a snap-blade type, safely and carefully snap-off the tip for a fresh blade. Simply chop your herbs on a clean surface, working it into a consistent, chunky texture. This method allows for controlled grinding, enabling you to achieve the desired texture.

Pestle and Mortar for Traditionalists

For those who appreciate a more traditional approach, a pestle and mortar can be an effective alternative. While this method might be a bit time-consuming, it ensures an authentic grind without compromising the essence of your herbs. Care should be taken not to apply excessive force, preventing over-grinding, and preserving the integrity of your herb. The pestle and mortar method cater to individuals who enjoy the tactile nature of preparing their herbs.

Hand Grinding for Simplicity

Sometimes, simplicity reigns supreme. Using your hands to grind herbs provides a tactile and sensory experience that connects you more intimately with your herb. Break down your buds into smaller pieces by gently rubbing them between your fingers. While this method is straightforward and allows you to feel the consistency, it's essential to note that manual grinding may take a bit more time compared to using dedicated tools.

Exploring these alternative methods expands your repertoire of herb preparation techniques, ensuring that, regardless of the circumstances, you can enjoy a finely ground product for an enhanced herb experience. Whether you're a traveler, facing technical difficulties, or simply appreciate the hands-on approach, these alternative methods offer versatility, allowing you to adapt your herbs preparation to any situation, ensuring a consistent and enjoyable experience every time.

Coffee Grinders for Herbs: A Practical or Problematic Solution?

The debate around the suitability of coffee grinders for grinding potent herbs is not new. Coffee grinders, commonly found in many households, emerge as a potential tool for this purpose. However, the question remains: Are they a practical solution or do they present more problems than they solve?

The Appeal of Using Coffee Grinders

Ease of Use and Accessibility: Coffee grinders are widely available and can process a significant amount of herb at once, making them an attractive option for users looking to save time and effort.
Cost-Effectiveness: Compared to specialized herb grinders, coffee grinders are generally more affordable and serve a dual purpose, appealing to budget-conscious consumers.

Potential Drawbacks and Considerations

Flavor Contamination and Potency Impact

One significant concern with using coffee grinders for potent herbs is the potential for flavor contamination. Coffee oils and residues can adhere to the grinder's components, potentially transferring to the herb and altering its natural flavor profile. Additionally, the high-speed blades of a coffee grinder can generate heat and cause friction, potentially affecting the potency of the herb by degrading delicate cannabinoids and terpenes.

Mitigation Strategies: Regular and thorough cleaning can help minimize flavor transfer, although it may not eliminate it entirely. Users concerned about potency might opt for pulsing rather than continuous grinding to reduce heat generation.

Challenges in Cleaning and Maintenance

Maintaining a coffee grinder for dual purposes introduces additional cleaning challenges. Herb residue can be sticky and difficult to remove, potentially leading to cross-contamination or even damage to the grinder over time.

Effective Cleaning Practices: Disassembling the grinder for detailed cleaning with isopropyl alcohol or specialized cleaning solutions can mitigate these issues, though it requires extra effort and diligence.

While using a coffee grinder for herb might seem like a convenient and cost-effective solution, it's essential to weigh the practical benefits against potential drawbacks. Flavor contamination, potency reduction, and cleaning challenges are significant considerations. For those prioritizing the integrity and quality of their herb experience, investing in a dedicated herb grinder might be the preferable choice. Ultimately, the decision will depend on individual priorities, such as convenience, budget, and consumption preferences.

In light of the evolving herb landscape and the variety of products available, consumers are encouraged to explore and experiment cautiously with different preparation methods to find what best suits their needs while being mindful of the potential implications on quality and experience.

Residual Flavors: The Potential Impact of Grinding Herb in a Coffee Grinder

Using a coffee grinder for both coffee beans and herb might seem efficient, but it raises concerns about residual flavors. This section explores how these residual flavors can impact your herb experience.

The Nature of Residual Flavors

Flavor Transfer: Coffee beans are rich in oils and compounds that contribute to their flavor profile. When you use a coffee grinder for beans and then for herb, there's a risk of these oils transferring to your herbs, potentially altering its natural taste and aroma.
Impact on Herb Experience: For connoisseurs who appreciate the subtle flavors and terpenes in different herb strains, the adulteration with coffee flavors can detract from the purity of the experience. The combination of flavors might not always be unpleasant, but it can overshadow the unique characteristics of the herb.

Mitigating Flavor Transfer

Thorough Cleaning: Regular and thorough cleaning of the coffee grinder can minimize flavor transfer. This involves disassembling the grinder parts and using isopropyl alcohol or specialized cleaning solutions to remove coffee oils and residues.
Dedicated Grinders: If preserving the integrity of your herb's flavor is paramount, consider investing in a separate grinder for herb use. This eliminates cross-contamination risks and ensures that each substance maintains its distinct flavor profile.

Cleaning Challenges: Maintaining a Coffee Grinder for Dual-Purpose Use

Maintaining a coffee grinder for dual purposes presents several cleaning challenges. Proper maintenance is essential to prevent flavor contamination and ensure the longevity of the device.

Importance of Regular Cleaning

Preventing Cross-Contamination: Regular cleaning prevents the buildup of coffee oils and herb residue, which can cross-contaminate and affect the flavors and potency of both substances.
Ensuring Grinder Longevity: Residues can clog your grinder, reducing its efficiency and potentially leading to breakdowns. Regular cleaning ensures the grinder operates smoothly and lasts longer.

Effective Cleaning Techniques

Disassembly and Manual Cleaning: For thorough cleaning, disassemble the grinder as much as possible and clean each part individually. Use brushes and isopropyl alcohol for hard-to-reach places.
Use of Natural Cleaners: For those concerned about chemical residues, natural cleaners like white vinegar or baking soda solutions can be effective. These substances can help dissolve oils and residues without leaving harmful residues.

In conclusion, while using a coffee grinder for herbs might seem like a convenient solution, it comes with its set of challenges and considerations. From flavor contamination and potency reduction to cleaning difficulties, users must weigh these factors against the convenience offered. For those dedicated to preserving the purity and effectiveness of their herbs, investing in a dedicated grinder might be the preferable path.

Reaching A Conclusion...

Before you end up with sore fingers from crushing your herbs by hand the whole time, or your arms give up with pain after you invest so much time and energy into manually grinding your herbs every day, isn’t it better to just run to the nearest store and get yourself a trusty coffee grinder to do the job for you?

These electrical coffee grinders are multi-functional, safe and user-friendly. Still, there may be some drawbacks to using this appliance. You risk grinding up your precious herbs into dust and potentially losing its essence. Additionally, clean-up of the appliance can prove to be difficult sometimes, as stubborn particles may get stuck in the crevices.

Now that you are aware of the pros and cons of using a coffee grinder for the purpose of grinding up herbs, which method will you prefer the most to get the task done? Let us know!

Related Article: Places to Buy Weed Grinders Online

Please note, comments must be approved before they are published